517-8243 5178243 Injector Sleeve for Engine C4.4 C6.6
Thuộc tính cơ bản
Nơi xuất xứ:
Trung Quốc
Tên thương hiệu:
JIAJUE
Số mô hình:
C4.4 C6.6
Giao dịch Bất động sản
Số lượng đặt hàng tối thiểu:
1
Giá:
Please send mail or WhatsApp
Điều khoản thanh toán:
L/C,D/A,D/P,T/T, Western Union,
Khả năng cung cấp:
1000 chiếc / tháng
Tóm tắt sản phẩm
517-8243 Injector Sleeve for Engine C4.4 C6.6 High-quality replacement injector sleeve compatible with C4.4 and C6.6 engines. This essential component ensures proper fuel injection and engine performance. Product Specifications Product Name Injector Sleeve Part Number 517-8243 Brand Name JIAJUE ...
Chi tiết sản phẩm
Làm nổi bật:
C4.4 C6.6 engine injector sleeve
,Diesel fuel injector replacement part
,5178243 injector sleeve with warranty
Part Number:
517-8243
MOQ:
1
Mô tả sản phẩm
517-8243 Injector Sleeve for Engine C4.4 C6.6
High-quality replacement injector sleeve compatible with C4.4 and C6.6 engines. This essential component ensures proper fuel injection and engine performance.
Product Specifications
| Product Name | Injector Sleeve |
| Part Number | 517-8243 |
| Brand Name | JIAJUE |
| Model Compatibility | C4.4 C6.6 |
| Availability | Rich Stock |
| Approximate Weight | 1KG |
| Size (per unit) | 20cm x 5cm x 8cm |
| Delivery Methods | DHL FedEx TNT UPS |
| Warranty | 3 months |
| Shipment | Dispatched within 24-48 hours |
Product Photos & Testing
Related Products
Frequently Asked Questions
Q1: How do I install my fuel injector after purchasing it?
Please refer to the "Step-by-Step Installation Guide" on our product details page, which contains very detailed installation instructions for how to install the injector.
Q2: What precautions should I take before installing 5178243 Injector Sleeve?
The installation environment must be dust-free; the O-ring must be lubricated with clean machine oil before installation to prevent oil leakage caused by cutting the O-ring during installation; and remember to check that the O-ring is installed correctly.
Q3: Why is my engine still unusable after replacing the fuel injector?
This is common, due to air trapped in the high-pressure oil rail. Please cycle the engine in short bursts (no more than 30 seconds) to purge air. It may take several attempts to stabilize the pressure.
Q4: Is my device compatible with this part number of fuel injectors?
If you're not sure if this fits your machine, please send us your Engine Serial Number (ESN) for free verification.
Q5: How to determine if your fuel injectors need replacing?
• Cylinder Cut-out Test: Using diagnostic software (ET), cylinders are shut off one by one, and engine speed fluctuations are observed to locate the faulty cylinder.
• Fuel Rail Pressure Test: Check for internal leaks that prevent the system from building up the critical pressure required for starting.
• Back-leakage Test: Excessive back-leakage usually indicates severe wear of the internal control valve assembly.
• Visual Inspection: Inspect the fuel injector nozzles for carbon buildup, blockage, or corrosion.
• Fuel Rail Pressure Test: Check for internal leaks that prevent the system from building up the critical pressure required for starting.
• Back-leakage Test: Excessive back-leakage usually indicates severe wear of the internal control valve assembly.
• Visual Inspection: Inspect the fuel injector nozzles for carbon buildup, blockage, or corrosion.
Q6: How long will it take to receive my package after I make the payment?
This depends on your country and region, and the customs clearance time in your country. Please feel free to contact us and send us your address and postal code so we can check shipping costs and estimate delivery time for you.
Step-by-Step Installation Guide
Pro-Tip: HEUI (Hydraulic Electronic Unit Injection) systems are extremely sensitive to contamination. A single speck of dust can cause premature failure.
1. Preparation: Clean the injector bores thoroughly. Ensure there is no carbon debris, old O-rings, or fuel/oil residue at the bottom of the seat. Inspect the injector sleeve for any signs of pitting or erosion.
2. Lubrication: Apply clean engine oil to the three O-rings and the backup rings. Warning: Never use grease. Only use clean engine oil to ensure the seals slide in without tearing.
3. Seating the Injector: Push the injector down firmly by hand until you feel it "seat." Install the hold-down clamp and bolt.
4. Torque Specifications: Tighten the bolt to 30 N⋅m±7 N⋅m (22 lb-ft). Note: Over-tightening can crack the injector body; under-tightening causes combustion gas leakage.
5. Trim Code Programming: Locate the 6-digit alphanumeric code on the top of the injector solenoid. Use ET (Electronic Technician) software to program this code into the ECM to ensure precise fuel delivery synchronization.
Troubleshooting Guide
| Issue | Root Cause | Solution |
| Black Smoke | Poor spray atomization or a stuck needle valve can cause dripping. | Inspect the air filter. |
| Hard Start | Internal leakage in the injector can lead to insufficient starting oil pressure. | Inspect the injector O-rings and internal seals. |
| Engine Misfire | A faulty solenoid valve coil or worn internal valve components can cause this. | Inspect the wiring harness connections and replace any damaged injectors. |
Company Profile
Exhibition
Factory Environment
Packaging & Shipping
Sản phẩm liên quan
-
262-2878 Máy điều khiển ECU 2622878 Đối với các bộ phận động cơ C15 C18
262-2878 Controller ECU 2622878 For C15 C18 Engine Parts Product Name: Controller Place of Origin: GUNZGHOU Brand Name: JIAJUE Part Number: 262-2878 MOQ 1 Piece Condition: Brand New Availability: Rick Stock Supply Ability: 1000pcs Per Month Port: Guangzhou/Shenzhen/Ningbo/Shanghai Delivery Methods: DHL FedEx TNT UPS Payment Methods: TT, Western Union, Money Gram, Credit Card,Paypal Company Advantage GUANGZHOU JIAJUE MACHINERY PARTS is supplying your Genius, After -
160-1758 1601758 ECU điều khiển cho máy tải D6R
160-1758 1601758 Controller ECU For D6R Loader Product introduction Product Name: ECU Place of Origin: GUNZGHOU Brand Name: JIAJUE Part Number: 160-1758 Type: Excavator Parts MOQ 1 Piece Condition: Brand New Availability: Rick Stock Supply Ability: 1000pcs Per Month Port: Guangzhou/Shenzhen/Ningbo/Shanghai Delivery Methods: DHL FedEx TNT UPS Payment Methods: TT, Western Union, Money Gram, Credit Card,Paypal Product details pictures Related Products Company Profile GUANGZHOU -
134-6553 1346553 ECU điều khiển ECM cho máy nạp bánh 120H
134-6553 1346553 ECU ECM Controller For 120H Wheel Loader Product introduction Product Name: ECU Place of Origin: GUNZGHOU Brand Name: JIAJUE Part Number: 134-6553 Type: Excavator Parts MOQ 1 Piece Condition: Brand New Availability: Rick Stock Supply Ability: 1000pcs Per Month Port: Guangzhou/Shenzhen/Ningbo/Shanghai Delivery Methods: DHL FedEx TNT UPS Payment Methods: TT, Western Union, Money Gram, Credit Card,Paypal Product details pictures Product Testing Steps 1.**Prepare -
243-3820 2433820 Bảng giám sát cho động cơ C11
243-3820 2433820 Monitor Panel For C11 Engine Product introduction Product Name: Monitor Place of Origin: GUNZGHOU Brand Name: JIAJUE Part Number: 243-3820 Type: Excavator Parts MOQ 1 Piece Condition: Brand New Availability: Rick Stock Supply Ability: 1000pcs Per Month Port: Guangzhou/Shenzhen/Ningbo/Shanghai Delivery Methods: DHL FedEx TNT UPS Payment Methods: TT, Western Union, Money Gram, Credit Card,Paypal Product details pictures Related Products Company Profile
